MUTAN MONKEY -ANALOG INSTRUMENTS

Baby Box Noise Generator

230 EUR / Out of stock.
Baby Box is a chaotic noise machine and you can use it in one of three modes of action: Auto, Constant or Trig. In the Auto and Constant modes, it generates noise and you control parameters like noise pitch and tempo, delay interval and length, with its 10 control knobs.
The noise originates from oscillators in the Baby Box circuit. The signals from them are superimposed and a “noise” is produced. One of the oscillators has much lower frequency of oscillation than the others. It gives a “beat” to the noise and the tempo is controlled with the Sun knob, up to the left – set it near max for rave-floor like sound, and near minimum position for bomb raid alarm kind of noise!
In the trig mode it is possible for other sound generating devices, such as a guitar, to “talk” to the baby box – a line in signal sets off the sounds of the box. The big knob, Pluto, adjusts the mix between clean and noise. Turned all the way to the left, a clean unaffected signal comes out on the line out. As it is turned up, a classic guitar fuzz blends in. The trigging of the noise oscillators begins when Pluto is near maximum.
The noise circuit is connected to a delay circuit, which puts some “depth” to the sound. The delay has two controls: number of repeats and time between repeats (Neptune and Uranus).
Baby Box is furnished with stereo output. The signal is split up in two in the delay circuit, and different sounds are produced in the two output channels. Plug in stereo headphones directly to the output and have great fun!
This is a very moody pedal. If you want a decently behaving effect, maybe something else is better! We have added a true bypass foot switch to it. This is if you quickly want to bypass the odd sounds and get back to normal again!
Even though the same value of components are used, all boxes seem to behave different. This is one of the reasons it is great fun building this one.
The first Baby Box was made in 1976 by Johnny Roslund. It had only the noise generating part of today’s Baby Box circuit, but it had a small amplifier with a speaker built in. And it was built in a wooden box. The second Baby Box was built in 2004, also in a wooden box. No. 4 was made in a metal box and the circuit was developed a bit. The circuit was developed further in the next years and it got a delay and a second output channel for stereo out. A bit later the input channel with fuzz and true bypass for it came along.
VIDEO
https://www.youtube.com/watch?v=KlgGftPgk4Y